 odel CX
Model CX - New Model!
The new multifunction SpeakerMate CX will now allow any typical combo amp to either power an external speaker cabinet separately, or in tandem with your combo’s speaker. A separate function of the SpeakerMate CX also allows a number of different speaker impedance combinations to be used with or without your combo’s internal speaker. For example, a typical 50 to 100watt, 1x12” combo could be used as a “head” to power additional 2x12, 4x10 or 4x12 speaker cabinets with or without your combo’s internal speaker. Now you can run your combo on top of a 4x12 as a “stack” setup. Since most combo amps are open back designs that have a tendency to “bottom out” with a lack of bass response, this feature allows your combo to kick it up a notch or two!
Model TWO
The Model 2 features 2 separate, 1/4" and 2 separate Neutrik Speakon connectors. Now, multiple combinations of speaker cabinets with either connector type and impedances can be used at the same time on one mono output amplifier.
Model Two came about after numerous requests from bassists,PA & DJ operators alike.They wanted to able to use different combinations of lower powered speaker cabinets that were equipped with traditional ¼” jacks,along with higher powered cabinets,most of which were solely equipped with Neutrik Speakon connectors.They needed to able to do this without having to retrofit connectors into all their cabs,jack panels or jimmy up all sorts of odd cables & adaptors to run back to their poweramps as well.
Housed in the same size enclosure as the Model 5,this new model features a mono Speakon amp input,as well as dual ¼” and dual Speakon cabinet feeds. Besides performing many of the same functions as a Model 4 and Model 5,we’ve also added a clever “imp-switching”mode function(user switchable)that offers players more hookup combinations with the use of mixed or matched connectors that can be easily configured into series or parallel pairs and quad setups.
Maximum power handling rating is 1000watt rms down to 4ohms at the output.
Model FOUR
The Model FOUR for mono guitar or bass amp owners who want to run maximum
four speaker cabinets - great for building a wall of sound!
Model FIVE
SpeakerMate Model Five incorporates a new design that differs from other SpeakerMate models... Model Five also has a new feature that allows you to compare two different speaker setups, either individually or together, on the same amp, all while maintaining a safe operating load impedance.
Model Five features genuine Neutrik brand Speakon 2pole, NL2 keyed, locking speaker cable connectors for added safety in high power applications to prevent cables from accidently becoming loose or disconnected.
Model SIX
The Model
SIX is our most popular model, allowing you to connect up to SIX
speaker cabinets on a mono output amp. Extensively used for monitor
amps (running up to SIX monitors-your drummer will thank you!) and
box-top mixer amps (running SIX mains speakers). The Speakermate
Model SIX is excellent for connecting from two to six sub-woofers
off of one large mono power-amp. Since lo-frequency signals are largely
omni directional, why tie up two sides of a stereo amp to power subs
when a Speakermate and a mono power-amp will do the job for less.
Model EIGHT
The Model EIGHT dual channel is popular for larger dj, allowing the
use of up to FOUR cabinets PER SIDE on ONE stereo power-amp! That's
EIGHT CABINETS parting your hair! The MODEL EIGHT is also popular
with the use of dual-amp mixer-amps (one for mains,one for monitors)
allowing up to FOUR mains and FOUR monitors to be operated with a
SpeakerMate Model Eight.
|
