Model FOUR

  

Diagram E

 
  • With four, 4ohm cabinets connected to SpeakerMate, amp “sees” approx. 4 to 5ohms.
  • With four, 8ohm cabinets connected to SpeakerMate, amp “sees” approx. 7 to 9ohms.
  • With four, 16ohm cabinets connected to SpeakerMate, amp “sees” approx 14 to 16.7ohms. E.P.I state

Diagram F

 
  • Same conditions as in diagram E apply. E.P.I state

 

 

 

 

 
   
Model FIVE (New!)  
   
 
   
   
 
   
   
 
   
   
 
   
   
 
   
   
 
   
   
Model SIX

 

 

Diagram A

 
  • With six, 8ohm cabinets connected to SpeakerMate, channel “B” amp output will “see” approx. 6ohms.

Diagram B

 
  • With six, 8ohm cabinets connected to SpeakerMate, channel “B” amp output will “see” approx. 6ohms.
  • With six, 16ohm cabinets connected to SpeakerMate, channel “B” amp output will “see” approx. 10ohms.

Diagram C

 
  • With six, 8ohm cabinets connected to SpeakerMate, the amp “sees” approx. 6ohms.
  • With six, 16ohm cabinets connected to Speakermate, the amp “sees” approx.10ohms.

Diagram D

 
  • With six, 8ohm cabinets connected to SpeakerMate, the amp “sees” approx. 6ohms. E.P.I state

Diagram G

 
  • With six, 8ohm cabinets connected to SpeakerMate, the amp “sees” approx. 6ohms. E.P.I state

 

 

 

 

 

 

 

 

 

 

 

 
Model EIGHT

 

 

Diagram H

 
  • Per side; With one, 8ohm main speaker, two, 16ohm remote located speakers, that amp output channel “sees” approx.14ohms. E.P.I state
  • Per side; With one, 4ohm main speaker, two, 8ohm remote located speakers, that amp output channel “sees” approx. 7ohms.
  • Per side; with three, 8ohm speakers connected, that amp output channel “sees” approx. 11ohms. E.P.I state NOT AVAILABLE
  • Per side; with three, 4ohm speakers connected, that amp output channel “sees” approx. 5 to 6ohms. EPI state NOT AVAILABLE

Diagram I

 
  • Stereo Power Amp / Per side; With four, 4ohm speakers connected, each amp output channel “sees” approx. 4 to 5ohms. E.P.I state
  • Stereo Power Amp / Per side; With four, 8ohm speakers connected, each amp output channel “sees” approx. 7 to 8.25 ohms. E.P.I state
  • MONO (typical mixer amp) output amp; With four, 8ohm speakers connected per SpeakerMate channel (for a total of eight, 8ohm speakers) connect BOTH channels of
    Model Eight to the MONO output of the amp. The amp “sees” approx. 4 to 5ohms. E.P.I state
  • MONO (typical mixer amp) output amp; With four, 16ohm speakers connected per
    SpeakerMate channel (for a total of eight, 16ohm speakers) connect BOTH channels of Model Eight to the MONO output of the amp. The amp “sees” approx. 7 to 9ohms. E.P.I state